Contact
Home
|
Contact
|
News
|
About Us
|
Products
Facebook Twitter
Tel: 01695 280510

Odour Control Cover

Odour Control Covers

GRP Deck 500

 

GRP Odour Control Covers are a one-piece pultruded profile, 500mm over width and 40mm thick, with a tongue and groove joint along the length of the plank that gives a firm, sealable joint between lengths of profile.
 
Odour Control covers give a solid floor with a gritted anti-slip surface. It will span 1.5m at a design load of 5kN/m2 with a deflection limit of L/200 and meets all the requirements of BS 4592-4 Industrial type flooring and stair treads Part 5: Solid plates in metal and glass reinforced plastics (GRP) Specification and BS EN ISO 14122 part 2 - Safety of Machinery Permanent means of access to machinery.
 
Our GRP interlocking Decking system meets all the requirements of EN 13706 Specification of grp profiles Grade E23 and is manufactured under ISO 9000 registered quality control system.
 
GRP DECK 500 is suitable as a mezzanine floor, for walkways, pedestrian bridge decks and odour control covers or to keep out water penetration in potable and waste water treatment units.
 
Deck 500 can be used in a number of other applications where its strength, light weight and easy of joining provide important benefits. For example:

  • Deck 500 can be used as deck covers for cooling towers
  • Baffles in water treatment tanks
  • Stop locks
  • Flood defence barriers easy to install, no theft value
  • Odour Control Covers
  •  

    Deck 500 

     

    Mechanical Properties for Odour Control Covers
    The following data has been calculated from measurements made of the full section modulus - EN 13706, Annex D

    Load Table

     Deck500

     As an alternative we can offer moulded option for covers such as the following:

     

    grp covers

     

    GRP Covers

     

    Advantages of GRP Odour Control Covers

    GRP Covers are designed, manufactured and installed to protect the environment against any odours in a very corrosive atmosphere.
    GRP Odour Control Covers are designed to British & European Standards incorporating specific Customer preferences.

    Areas to Cover –
      Sewage Treatment 
                    Inlet Channels 
                    Detritors  
                    Screen Area  
                    PST’s  
                    Sludge Tanks 
                    Outlet Channels  
                    Wet Wells  
                    Pumping Stations  
                    De-sludge chambers  
                    Screw Pumps

    Areas to Cover – 
                    Clean Water Treatment  
                    Inlet Channels 
                    Screen Area 
                    Lamellas 
                    Settling Tanks 
                    Outlet Channels

    Captrad GRP Odour Control Covers  

     

    Deck 500Fiberglass PanelsGRP Flat SheetsGRP Grating - ClipsGRP Grating - GRP GratingsGRP Grating - High Load GratingGRP Grating - Marina Mini MeshGRP Grating - Moulded GratingGRP Grating - Phenolic GratingGRP Grating - Pultruded GratingGRP Grating - Riser ShaftGRP Grating - Rooftop WalkwaysGRP Grating - Solid Top GratingGRP HandrailsGRP Handrails - Key ClampGRP Non Slip SheetsGRP Profiles - Angle GRP Profiles - Box SectionGRP Profiles - ChannelGRP Profiles - I BeamsGRP Profiles - RodsGRP Profiles - TubesGRP Scaffolding TubeGRP Stair TreadsGRP Uni StrutLadder RungsOdour Control CoverPhenolic SheetsPlastic Glazing | GRP Glazing

    GRP Deck 500 is Excellent for Odour Control Covers - with greater spans achieved